ESCO 10381 20 Ton Air Hydraulic Bottle Jack
ESCO 10381 is the twenty-ton Pro Series air/hydraulic bottle jack. Its listed ten-inch starting height, six-inch ram travel and four-inch screw adjustment explain different aspects of reach; compare all three with the intended lifting point.
Specifications and included details
- 20-ton capacity, listed as 40, 000 lb.
- Minimum height 10 inches; maximum height 20 inches.
- Ram travel 6 inches; screw adjustment 4 inches; saddle width 1.75 inches.
- 110-125 PSI listed air requirement and 1/4-inch NPT air inlet.
- Four-foot swivel-end air hose with push-button trigger and two-piece handle explicitly listed.
Before ordering
Verify the rated load, initial clearance, saddle contact and available air supply. Check connector thread as well as pressure; 1/4-inch NPT identifies the inlet thread, not necessarily the installed shop quick coupling. Use manufacturer instructions and appropriate separate load supports.
Product questions and answers
Does the ten-inch height increase mean ten inches of ram stroke?
No. The listed increase comprises six-inch ram travel and four-inch screw adjustment. Follow the manufacturer's permitted extension configuration.
Is 1/4-inch NPT an air-pressure setting?
No. It is the inlet thread specification. The pressure requirement is separately listed as 110-125 PSI.
Does the 12-30-ton series range change this jack's capacity?
No. This specific model is listed as twenty tons. The wider range describes other products in the series.
Browse Shop Equipment > Vehicle Jacks to compare other options.
