Phoenix USA 05-Cur Ford F53 F450 F550 Rear Pair DOT Axle Set (NF20R)
The Phoenix USA 05-Cur Ford F53 F450 F550 Rear Pair DOT Axle Set (NF20R) provides an effective and straightforward way to enhance the appearance of your Ford commercial vehicle's rear wheels. This kit is specifically designed to fit 2005 to current Ford F53, F450, and F550 models equipped with 19.5-inch dual rear wheels that are either 6 inches or 6.75 inches wide and feature a 10-lug pattern on a 225mm bolt circle. Constructed from polished stainless steel, these simulators offer a durable and visually appealing solution to upgrade the look of standard steel wheels. The bolt-on installation process is simple, utilizing your existing lug studs for a secure fit. This rear pair kit includes everything needed for installation, making it a convenient upgrade for your vehicle.
KEY FEATURES AND BENEFITS:
Vehicle Compatibility: Precisely engineered for 2005-Current Ford F53, F450, and F550 series trucks with dual rear wheels.
Wheel Size Accommodation: Suitable for 19.5-inch diameter wheels in both 6-inch and 6.75-inch widths.
Lug Pattern Specificity: Designed for a 10-lug wheel configuration with a 225mm bolt circle.
Dual Rear Wheel Application: Intended for vehicles with dual wheels on the rear axle.
Polished Stainless Steel Construction: Offers a bright, clean aesthetic and resistance to rust and corrosion, ensuring long-lasting good looks.
DOT Compliance: Meets Department of Transportation standards for wheel covers, ensuring safety and regulatory adherence.
Simple Bolt-On Installation: Installs directly over existing lug nuts using the included mounting hardware, requiring no wheel removal.
Complete Rear Pair Kit: Includes two rear wheel simulators, providing a uniform upgrade to both sides of the rear axle.
Included Hardware: Comes with all necessary mounting components, an installation tool, and clear instructions for a hassle-free setup.
Product Name: Phoenix USA Inc. DOT Style Bolt-On Wheel Simulator Kit
Compatibility: 2005-Current Ford F53, F450, F550
Wheel Diameter: 19.5 inches
Wheel Width: 6 inches and 6.75 inches
Bolt Circle: 225mm
Axle Position: Rear
Wheel Configuration: Dual Rear Wheel (DRW)
Material: Polished Stainless Steel
Mounting Style: Bolt-On (Over-Lug / Stud Mount)
Finish: Polished
Included in Kit: 2 x Rear Wheel Simulators, Mounting Hardware, Installation Tool, Instruction Sheet
Preparation: Ensure your vehicle is parked on a level surface with the parking brake engaged. Gather the components of the Phoenix USA wheel simulator kit and the provided installation tool.
Initial Placement: Carefully position one of the rear wheel simulators against the wheel, aligning the hand holes (if applicable) and ensuring it sits flush against the wheel surface.
Securing with Hardware: Using the provided mounting hardware (typically specialized nuts or bolts), thread them onto your vehicle's existing lug studs through the designated holes on the wheel simulator.
Even Tightening: Using the installation tool, tighten the mounting hardware in a star pattern (opposite nuts/bolts) to ensure even pressure and a secure fit. Avoid overtightening initially.
Final Tightening: Once all mounting hardware is snug, go around and tighten each piece to the recommended torque specification (refer to the included instructions or your vehicle's manual if a specific torque is mentioned).
Repeat for Other Wheel: Follow the same steps to install the second rear wheel simulator on the other side of the vehicle.
Post-Installation Check: After installation, visually inspect both simulators to ensure they are securely attached and there are no loose parts. Drive a short distance and then re-check the tightness of the mounting hardware.
BENEFITS OF USING THE PHOENIX USA 05-CUR FORD F53 F450 F550 REAR PAIR DOT AXLE SET (NF20R):
Enhanced Vehicle Appearance: Instantly upgrades the look of your Ford truck's rear wheels, providing a cleaner, more polished, and professional aesthetic similar to chrome wheels at a fraction of the cost.
Protection Against Elements: The stainless steel construction helps shield the underlying steel wheels from road debris, salt, and other corrosive elements, potentially extending their lifespan.
Easy Maintenance: The smooth polished stainless steel surface is easier to clean and maintain compared to standard steel wheels, helping to keep your vehicle looking its best with minimal effort.
Cost-Effective Upgrade: Offers a significant visual improvement without the expense of purchasing entirely new alloy or chrome wheels.
Maintains Original Wheel Integrity: Because these are simulators, your original wheels remain intact, preserving the vehicle's factory specifications and potentially simplifying future maintenance or tire changes.
Mirror-like Polished Surface: Provides a high-shine, attractive finish that enhances the overall appearance of the vehicle.
Robust Stainless Steel Composition: Offers excellent resistance to rust, corrosion, and the rigors of daily use.
Precise Fitment: Engineered specifically for the listed Ford F-Series models and wheel specifications, ensuring a secure and seamless integration.
Over-Lug Mounting Design: Utilizes the existing lug studs for a straightforward and stable attachment.
Designed for Dual Wheel Applications: Perfectly contours to the shape and offset of dual rear wheel setups.
Includes All Necessary Components: Comes complete with simulators and all required hardware for a ready-to-install solution.
Meets DOT Standards: Complies with Department of Transportation regulations for wheel coverings.
Lightweight yet Strong: Balances aesthetics with practicality, adding minimal unsprung weight while maintaining structural integrity.
Contoured Design: Shaped to complement the curves and lines of the specified Ford truck wheels.
Facilitates Wheel Access: Designed with consideration for hand holes (if present on the original wheels), allowing for easier access when needed.
Product identification
- Brand: Phoenix USA
- Model / MPN: NF20R
