M7 NC-6246Q 3/4-Inch Impact with 6-Inch Anvil
The M7 NC-6246Q combines a 3/4-inch square drive with a 6-inch extended anvil for reaching recessed fasteners. Allow space for the full 13-inch tool and attached socket, rather than evaluating reach from the anvil alone.
Specifications and included details
- 3/4-inch square drive, 6-inch extended anvil and twin-hammer mechanism.
- 200–900 ft-lb forward torque and 1,200 ft-lb maximum reverse torque.
- 13-inch length, 7 lb weight and 7,500 RPM free speed.
- 90 PSI specification and 5.5 CFM average consumption.
Before ordering
Use matching impact-rated sockets. Verify operating airflow and hose setup for the work duty; average consumption is not continuous demand. Check final fastener tightening with an appropriate torque tool.
Product questions and answers
Does the six-inch dimension identify socket drive?
No. It describes anvil extension; socket drive is 3/4 inch.
Is the reverse maximum a final tightening setting?
No. Reverse performance does not establish calibrated tightening. Use the specified tightening procedure and torque verification.
Browse Air Tools > Air Impact Wrenches to compare other options.
