Baileigh 1002644 Combination Belt and Disc Grinder
Baileigh 1002644 combines a belt station and a disc station for metalworking cleanup. The belt's travel speed and disc's rotation speed use different units, so compare each abrasive station on its own rather than treating them as one grinder-speed figure.
Specifications and included details
- 1-1/2 HP motor and 110V single-phase power.
- 6-inch-wide by 48-inch-long belt; belt travel speed is 1,653 feet per minute.
- Disc identified nominally as 10 inches, with 9.84-inch diameter in the specifications; disc speed is 2,100 RPM.
- Tables adjust to 45 degrees; belt table is 6 x 10.5 inches and disc table 7.5 x 13 inches; dust port provided.
Before ordering
Confirm replacement abrasive dimensions with the model instructions before ordering. Set up material-appropriate dust collection; a port does not guarantee suitable capture of every grinding dust. Verify any required chamfer limit separately rather than inferring it from table tilt.
Product questions and answers
Is the belt speed 2,100 RPM?
No. The belt is listed at 1,653 feet per minute, while the disc turns at 2,100 RPM.
What belt size is specified?
The specification lists a 48-inch length and 6-inch width, commonly written as 6 x 48 inches.
Why check disc dimensions beyond the nominal 10-inch name?
The technical listing gives 9.84 inches for the disc. Verify the exact replacement abrasive requirement rather than relying only on the nominal title.
Browse Power Tools > Grinders to compare other options.
