Soartec WS-2108L 1-Inch 6-Inch-Anvil Air Impact
The Soartec WS-2108L combines a 1-inch drive, 6-inch extended anvil and two holding positions. The listed 1,800 ft-lb figure is specified at five seconds, so distinguish that measurement from the working range and forward maximum when comparing tools.
Specifications and included details
- 1-inch drive, 6-inch extended anvil, D-handle and side handle.
- Maximum torque at five seconds 1,800 ft-lb; forward maximum 1,700 ft-lb and working range 100–1,400 ft-lb.
- 17.36-inch listed length and twin-hammer mechanism.
- 21.1 CFM air consumption, 90 PSI specification, 3/8-inch NPT inlet and 1/2-inch minimum hose.
Before ordering
Check the complete socket, tool and handle envelope against the work area. Match compressor delivery to the stated demand and manufacturer requirements. Power positions are not calibrated torque settings; verify torque-critical fastening independently.
Product questions and answers
Is 1,800 ft-lb a precise forward setting?
No. It is a listed maximum measured at five seconds. The forward maximum and working range are stated separately, and none establishes a calibrated setting.
Is the drive six inches?
No. The square drive is 1 inch; 6 inches describes the extended anvil for access.
Does the 3/8-inch inlet specify a 3/8-inch hose?
No. The listing specifies a 3/8-inch NPT inlet and a minimum 1/2-inch hose. They describe different supply components.
Browse Air Tools > Air Fastening Tools to compare other options.
