Rockwood 32082 ADF Helmet with DIN 5–9 and 9–13 Ranges
The Rockwood 32082 provides separate DIN 5–9 and DIN 9–13 dark-shade ranges plus a DIN 4 grinding mode. Its 92 x 42 mm viewing area is distinct from the 110 x 90 x 8 mm cartridge size. The TIG capability is written as greater than five amps, so it should not be presented as confirmed operation at or below five amps.
Specifications and included details
- Light shade: DIN 4.
- Dark-shade ranges: DIN 5–9 and DIN 9–13.
- Grind-mode shade: DIN 4.
- Viewing area: 92 x 42 mm.
- Cartridge size: 110 x 90 x 8 mm.
- Two arc sensors; listed switching time 1/25,000 second.
- Delay settings listed as 0.25 and 0.7 second.
- Listed TIG capability: greater than 5 A.
- Optical class: 1/1/1/2.
Before ordering
Select the range, mode and shade required for the process using the current Rockwood instructions. Grind mode is not the selected welding shade. Verify sensor operation and any low-current conditions with the manufacturer; the greater-than-five-amp statement does not establish operation at exactly five amps.
Product questions and answers
Are cartridge size and viewing area the same dimensions?
No. The cartridge is listed as 110 x 90 x 8 mm, while the viewing area is 92 x 42 mm.
Does the TIG statement guarantee operation at exactly 5 A?
No. The listed condition is greater than 5 A, not 5 A or lower.
Can I weld while leaving it in grind mode?
Grind mode is listed as DIN 4. Use the required welding mode and shade according to the process and manufacturer's instructions.
Browse Safety & PPE > Welding Helmets to compare other options.
