Klein Tools 1613-35 Chicago Grip for Bare Copper Wire
Finding the best grip to pull small copper can be challenging. Copper stretches over time becoming too thin for some grips which may cause slippage. Some smaller grips are harder to manipulate when wearing rubber gloves and are not hot latch compatible. Using a grip that's too big, too strong or too aggressive could damage the cable. Klein Tools' 1613 Series Bare Wire Chicago Grip is big enough to work with gloves but small enough to pull #6 and #8 copper without damaging it. It's just right for the job.
Electrical Tester measures AC/DC voltage up to 1000V, 600A AC Current, 60MOhms Resistance, DC millivolts and microamps
Amp Clamp with automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
Clamp measures AC current and inrush current
Two K-Type thermocouple ports for differential temperature measurements
Test leads measure AC/DC voltage, DC microamp, resistance, LoZ, continuity, frequency, duty-cycle, capacitance, and diodes
Dedicated mode for capturing DC microamp and inrush current
Low-Pass filter and Low impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
Dual backlit 6000 LCD display for clear visibility in environments with low ambient lighting
Rugged design with a 6.6-Foot (2 m) drop protection and a CAT IV 600V Safety Rating
Includes carrying case, instruction manual, straight input test leads, two K-type thermocouples, and 3 x AAA batteries
Can be used with Magnetic Hanger Cat. No. 69417 (sold separately)
Use with K-Type Temperature Pipe Clamp Cat. No. 69140, and K-Type Temperature Probe Cat. No. 69144 (sold separately)
Type: Chicago Grip
Cable Type: Copper
Cable Diameter: 0.1285'' to 0.162'' (3.3 to 4.06 mm)
Locking Handle: Y
Jaw Type: Single V
Jaw Length: 4.188'' (10.6 cm)
Maximum Safe Load: 4500 lb (2041 kg)
Weight: 2.9 lb (1.3 kg)
UPC: 92644471919
Product identification
- Brand: Klein Tools
- Model / MPN: 1613-35
