IRWIN 1750 M14 x 1.50 mm HCS Plug Tap
IRWIN 1750 is a single metric plug tap for an M14 x 1.50 mm internal thread. The diameter and pitch must both match the repair or new thread; choosing by M14 alone can produce the wrong thread form for the mating fastener.
Specifications and included details
- M14 nominal thread diameter and 1.50 mm pitch.
- High-carbon steel construction and right-hand thread direction.
- Plug-style chamfer and four straight flutes.
- Bulk package quantity is one tap.
Before ordering
Confirm the mating thread, material, required tap-drill diameter and depth from an appropriate thread specification. A plug tap is not automatically a bottoming tap for full threads at the bottom of a blind hole. Match the tap wrench and method to the application.
Product questions and answers
Is every M14 thread compatible with this tap?
No. This tap has a 1.50 mm pitch. The mating thread must match both diameter and pitch.
Is a die or tap wrench included?
The explicit package inventory is one tap. A die and tap wrench are not listed as included.
Can a plug tap create full threads to the bottom of any blind hole?
Do not assume that. Chamfer length, hole depth and chip clearance affect usable thread depth; verify the required tap form and procedure.
Browse Cutting & Drilling > Taps & Dies to compare other options.
