Ingersoll Rand 2235TiMAX 1/2-Inch Air Impact
The Ingersoll Rand 2235TiMAX combines a 1/2-inch square drive with a twin-hammer mechanism and a titanium hammer case. Its maximum reverse and nut-busting figures describe different performance measures, so keep them separate when comparing impact wrenches.
Specifications and included details
- 1/2-inch square drive and twin-hammer impact mechanism.
- 930 ft-lb maximum reverse torque; 1,350 ft-lb nut-busting torque.
- Titanium hammer case, steel wear plate and composite housing.
- 7.6-inch overall length, listed weight 4.6 lb, 1/4-inch NPTF inlet and 3/8-inch minimum hose.
Before ordering
Confirm air pressure and consumption in the model manual and match the inlet fitting to its NPTF specification. Use impact-rated sockets and allow full socket and hose clearance. Performance torque ratings do not establish final fastener torque.
Product questions and answers
Why are 930 and 1,350 ft-lb both listed?
The listing labels 930 ft-lb maximum reverse torque and 1,350 ft-lb nut-busting torque. They are distinct performance measures, not two interchangeable fastening settings.
Does the titanium case mean the entire tool is titanium?
No. The titanium designation applies to the hammer case. The listing separately identifies a steel wear plate and composite housing.
Will a 1/4-inch air hose match the inlet requirement?
The inlet is listed as 1/4-inch NPTF, but the minimum hose is 3/8 inch. Thread size and hose bore are different specifications.
Browse Air Tools > Air Impact Wrenches to compare other options.
