Hi-Tech Industries HT-230 Vinyl, Plastic & Carpet Dye
Versatile Uses: Use confidently to safely restore, renew, and rejuvenate automotive carpet, leather, vinyl, and plastic. This Auto Carpet Dye can also be used to dye PVC, Fiberglass, Metal, ABS Plastic, Lexan, Acrylic, Polycarbonate, Polypropylene, and Recycled Plastics.
Aerosol Spray Can Net Weight: 11 oz.
Dries to the touch in 90 seconds and adheres within 10 minutes, approximate.
Appropriate coverage is 7 square feet, but may vary, depending on conditions.
UV Enhanced Stability
California / OTC VOC Compliant
How to Dye Automotive Carpet, Leather, Vinyl, and Plastic
Vacuum and thoroughly clean the carpet, leather, vinyl, or plastic to remove built-up polish, dirt, or silicones. Protect any area with a painter cloth, heavy paper, or painter tape that you do not want to dye the surface.
Before beginning to spray the area, shake the spray can vigorously for 2 minutes. You will hear the metal ball moving as you shake it. Adjust the spray pattern to horizontal or vertical, whichever is desired.
Hold the can vertical and about 12 inches from the surface. Continually move the aerosol spray can from side to side using light, even strokes. Apply 2-3 additional mist coats, if desired. Wait approximately 10 minutes between coats. Never spray in a heavy pattern.
Stand back and admire your new look! You will be amazed at your rejuvenated car interior.
Professional Tips:
It is important to blend the new color dye with the existing color. The snorkel type nozzle has an adjustable spray pattern that provides accurate coverage while diminishing the possibility of over spraying.
Best results are obtained with the temperature over 60 degrees F.
For carpet: brush the carpet fibers so they stand up as much as possible. This allows the dye to penetrate the deep fibers better.
Test a small, inconspicuous area first for compatibility and color matching.
Product identification
- Brand: Hi-Tech Industries
- Model / MPN: HT-230
