Grizzly H7760 2 x 27-Inch Belt Sander and 6-Inch Grinder
Grizzly H7760 puts belt sanding and wheel grinding at one bench station. The two abrasive formats need separate replacement checks: a 2 x 27-inch belt and a 6-inch wheel with its own width and bore requirements.
Specifications and included details
- 1/2 HP motor rated 110V single-phase, 3.2A; listed motor speed is 3,450 RPM.
- 2 x 27-inch sanding belt and 6 x 3/4 x 1/2-inch aluminum oxide grinding wheel.
- Flexible work light, wheel dressing tool and built-in coolant tray.
- Quick-adjust tool rests and a 1-1/2-inch dust port.
Before ordering
Match replacement belts by width and length, and wheels by diameter, width, bore and speed rating. Motor RPM is not belt surface speed. A coolant tray does not establish a wet-grinding system, and dust collection must suit the actual material and operation.
Product questions and answers
What replacement belt size does H7760 use?
The specified sanding belt is 2 inches wide and 27 inches long.
Is 3,450 RPM the belt travel speed?
No. It is the listed motor rotation speed. Belt surface speed would be a separate specification.
Does the coolant tray mean I can run the wheel wet?
Do not assume that. A tray is listed, but approved cooling and grinding methods must be confirmed in the machine instructions.
Browse Power Tools > Sanders & Polishers to compare other options.
